// Décodeur LoRaWAN officiel : EM300-MCS - Contact Sensor (Milesight) // Source : https://github.com/TheThingsNetwork/lorawan-devices/blob/master/vendor/milesight-iot/em300-mcs.js // The Things Network Device Repository, fichier publié par le constructeur, distribué sans modification. // Format : decodeUplink(input) (TTN v3 / ChirpStack v4). Hébergé par smartbuildings.fr. /** * Payload Decoder * * Copyright 2025 Milesight IoT * * @product EM300-MCS */ var RAW_VALUE = 0x00; /* eslint no-redeclare: "off" */ /* eslint-disable */ // Chirpstack v4 function decodeUplink(input) { var decoded = milesightDeviceDecode(input.bytes); return { data: decoded }; } // Chirpstack v3 function Decode(fPort, bytes) { return milesightDeviceDecode(bytes); } // The Things Network function Decoder(bytes, port) { return milesightDeviceDecode(bytes); } /* eslint-enable */ function milesightDeviceDecode(bytes) { var decoded = {}; for (var i = 0; i < bytes.length; ) { var channel_id = bytes[i++]; var channel_type = bytes[i++]; // IPSO VERSION if (channel_id === 0xff && channel_type === 0x01) { decoded.ipso_version = readProtocolVersion(bytes[i]); i += 1; } // HARDWARE VERSION else if (channel_id === 0xff && channel_type === 0x09) { decoded.hardware_version = readHardwareVersion(bytes.slice(i, i + 2)); i += 2; } // FIRMWARE VERSION else if (channel_id === 0xff && channel_type === 0x0a) { decoded.firmware_version = readFirmwareVersion(bytes.slice(i, i + 2)); i += 2; } // TSL VERSION else if (channel_id === 0xff && channel_type === 0xff) { decoded.tsl_version = readTslVersion(bytes.slice(i, i + 2)); i += 2; } // SERIAL NUMBER else if (channel_id === 0xff && channel_type === 0x16) { decoded.sn = readSerialNumber(bytes.slice(i, i + 8)); i += 8; } // LORAWAN CLASS TYPE else if (channel_id === 0xff && channel_type === 0x0f) { decoded.lorawan_class = readLoRaWANClass(bytes[i]); i += 1; } // RESET EVENT else if (channel_id === 0xff && channel_type === 0xfe) { decoded.reset_event = readResetEvent(1); i += 1; } // DEVICE STATUS else if (channel_id === 0xff && channel_type === 0x0b) { decoded.device_status = readDeviceStatus(1); i += 1; } // BATTERY else if (channel_id === 0x01 && channel_type === 0x75) { decoded.battery = readUInt8(bytes[i]); i += 1; } // TEMPERATURE else if (channel_id === 0x03 && channel_type === 0x67) { decoded.temperature = readInt16LE(bytes.slice(i, i + 2)) / 10; i += 2; } // HUMIDITY else if (channel_id === 0x04 && channel_type === 0x68) { decoded.humidity = readUInt8(bytes[i]) / 2; i += 1; } // MAGNET STATUS else if (channel_id === 0x06 && channel_type === 0x00) { decoded.magnet_status = readMagnetStatus(bytes[i]); i += 1; } // HISTORY DATA else if (channel_id === 0x20 && channel_type === 0xce) { var point = {}; point.timestamp = readUInt32LE(bytes.slice(i, i + 4)); point.temperature = readInt16LE(bytes.slice(i + 4, i + 6)) / 10; point.humidity = readUInt8(bytes[i + 6]) / 2; point.magnet_status = readMagnetStatus(bytes[i + 7]); i += 8; decoded.history = decoded.history || []; decoded.history.push(point); } // DOWNLINK RESPONSE else if (channel_id === 0xfe || channel_id === 0xff) { var result = handle_downlink_response(channel_type, bytes, i); decoded = Object.assign(decoded, result.data); i = result.offset; } else { break; } } return decoded; } function handle_downlink_response(channel_type, bytes, offset) { var decoded = {}; switch (channel_type) { case 0x02: decoded.collection_interval = readUInt16LE(bytes.slice(offset, offset + 2)); offset += 2; break; case 0x03: decoded.report_interval = readUInt16LE(bytes.slice(offset, offset + 2)); offset += 2; break; case 0x06: var data = readUInt8(bytes[offset]); var channel = (data >>> 3) & 0x07; var value = data & 0x07; if (channel === 0x01) { decoded.temperature_alarm_config = {}; decoded.temperature_alarm_config.condition = readConditionType(value); decoded.temperature_alarm_config.threshold_min = readInt16LE(bytes.slice(offset + 1, offset + 3)) / 10; decoded.temperature_alarm_config.threshold_max = readInt16LE(bytes.slice(offset + 3, offset + 5)) / 10; } else if (channel === 0x02) { decoded.magnet_alarm_config = {}; decoded.magnet_alarm_config.enable = readEnableStatus(value); // skip 4 bytes decoded.magnet_alarm_config.report_interval = readUInt16LE(bytes.slice(offset + 5, offset + 7)); decoded.magnet_alarm_config.report_times = readUInt16LE(bytes.slice(offset + 7, offset + 9)); } offset += 9; break; case 0x10: decoded.reboot = readYesNoStatus(1); offset += 1; break; case 0x27: decoded.clear_history = readYesNoStatus(1); offset += 1; break; case 0x28: decoded.report_status = readYesNoStatus(1); offset += 1; break; case 0x68: decoded.history_enable = readEnableStatus(bytes[offset]); offset += 1; break; case 0x69: decoded.retransmit_enable = readEnableStatus(bytes[offset]); offset += 1; break; case 0x6a: var interval_type = readUInt8(bytes[offset]); switch (interval_type) { case 0: decoded.retransmit_interval = readUInt16LE(bytes.slice(offset + 1, offset + 3)); break; case 1: decoded.resend_interval = readUInt16LE(bytes.slice(offset + 1, offset + 3)); break; } offset += 3; break; case 0x6d: decoded.stop_transmit = readYesNoStatus(1); offset += 1; break; case 0x79: var d2d_master_config = {}; d2d_master_config.mode = readD2DMode(bytes[offset]); d2d_master_config.report_type = readD2DReportType(bytes[offset + 1]); d2d_master_config.d2d_cmd = readD2DCommand(bytes.slice(offset + 2, offset + 6)); offset += 6; decoded.d2d_master_config = decoded.d2d_master_config || []; decoded.d2d_master_config.push(d2d_master_config); break; case 0xea: var data = readUInt8(bytes[offset]); var channel = data & 0x03; var enable_value = (data >>> 7) & 0x01; if (channel === 0x00) { decoded.temperature_calibration_settings = {}; decoded.temperature_calibration_settings.enable = readEnableStatus(enable_value); decoded.temperature_calibration_settings.calibration_value = readInt16LE(bytes.slice(offset + 1, offset + 3)) / 10; } else if (channel === 0x01) { decoded.humidity_calibration_settings = {}; decoded.humidity_calibration_settings.enable = readEnableStatus(enable_value); decoded.humidity_calibration_settings.calibration_value = readInt16LE(bytes.slice(offset + 1, offset + 3)) / 2; } offset += 3; break; default: throw new Error("unknown downlink response"); } return { data: decoded, offset: offset }; } function readProtocolVersion(bytes) { var major = (bytes & 0xf0) >> 4; var minor = bytes & 0x0f; return "v" + major + "." + minor; } function readHardwareVersion(bytes) { var major = (bytes[0] & 0xff).toString(16); var minor = (bytes[1] & 0xff) >> 4; return "v" + major + "." + minor; } function readFirmwareVersion(bytes) { var major = (bytes[0] & 0xff).toString(16); var minor = (bytes[1] & 0xff).toString(16); return "v" + major + "." + minor; } function readTslVersion(bytes) { var major = bytes[0] & 0xff; var minor = bytes[1] & 0xff; return "v" + major + "." + minor; } function readSerialNumber(bytes) { var temp = []; for (var idx = 0; idx < bytes.length; idx++) { temp.push(("0" + (bytes[idx] & 0xff).toString(16)).slice(-2)); } return temp.join(""); } function readLoRaWANClass(type) { var class_map = { 0: "Class A", 1: "Class B", 2: "Class C", 3: "Class CtoB", }; return getValue(class_map, type); } function readResetEvent(status) { var status_map = { 0: "normal", 1: "reset" }; return getValue(status_map, status); } function readDeviceStatus(status) { var status_map = { 0: "off", 1: "on" }; return getValue(status_map, status); } function readMagnetStatus(status) { var status_map = { 0: "close", 1: "open" }; return getValue(status_map, status); } function readYesNoStatus(status) { var status_map = { 0: "no", 1: "yes" }; return getValue(status_map, status); } function readEnableStatus(status) { var status_map = { 0: "disable", 1: "enable" }; return getValue(status_map, status); } function readConditionType(condition) { var condition_map = { 0: "disable", 1: "below", 2: "above", 3: "between", 4: "outside" }; return getValue(condition_map, condition); } function readD2DMode(mode) { var mode_map = { 1: "temperature_alarm", 2: "temperature_alarm_release", 3: "magnet_status_alarm", 4: "magnet_status_alarm_release" }; return getValue(mode_map, mode); } function readD2DReportType(type) { var type_map = { 0: "lora", 1: "d2d", 3: "d2d_and_lora" }; return getValue(type_map, type); } /* eslint-disable */ function readUInt8(bytes) { return bytes & 0xff; } function readInt8(bytes) { var ref = readUInt8(bytes); return ref > 0x7f ? ref - 0x100 : ref; } function readUInt16LE(bytes) { var value = (bytes[1] << 8) + bytes[0]; return value & 0xffff; } function readInt16LE(bytes) { var ref = readUInt16LE(bytes); return ref > 0x7fff ? ref - 0x10000 : ref; } function readUInt32LE(bytes) { var value = (bytes[3] << 24) + (bytes[2] << 16) + (bytes[1] << 8) + bytes[0]; return value & 0xffffffff; } function readD2DCommand(bytes) { return ("0" + (bytes[1] & 0xff).toString(16)).slice(-2) + ("0" + (bytes[0] & 0xff).toString(16)).slice(-2); } function getValue(map, key) { if (RAW_VALUE) return key; var value = map[key]; if (!value) value = "unknown"; return value; } //if (!Object.assign) { Object.defineProperty(Object, "assign", { enumerable: false, configurable: true, writable: true, value: function (target) { "use strict"; if (target == null) { throw new TypeError("Cannot convert first argument to object"); } var to = Object(target); for (var i = 1; i < arguments.length; i++) { var nextSource = arguments[i]; if (nextSource == null) { continue; } nextSource = Object(nextSource); var keysArray = Object.keys(Object(nextSource)); for (var nextIndex = 0, len = keysArray.length; nextIndex < len; nextIndex++) { var nextKey = keysArray[nextIndex]; var desc = Object.getOwnPropertyDescriptor(nextSource, nextKey); if (desc !== undefined && desc.enumerable) { // concat array if (Array.isArray(to[nextKey]) && Array.isArray(nextSource[nextKey])) { to[nextKey] = to[nextKey].concat(nextSource[nextKey]); } else { to[nextKey] = nextSource[nextKey]; } } } } return to; }, }); //}